1 1 1 0

CONTROLLED BLASTING

Demande d'information
Envoyer à un contact
Imprimez en PDF
Diminuer la taille du texte
Augmenter la taille du texte
minage_controle

EPC-France has always been a driving force in controlled blasting. Ensuring on-site satety is a major focus of the development of EPC-France and controlled mining is a necessary passage for this. As such, EPC-France has taken upon itself the development of the EXPERTIR 3D Software : a blasting software designed by miners. EPC-France has compiled in this software all of the expertise of its engineers and technicians.

 

minage_controle

To ensure the security of the settlements, the software is able to integratre the 3D profile of fronts, whatever the type of devise used. This geometrical knowledge, once acquired, can model the implantation directly on computer : tilt, depth, orientation of the drilling, as much information as is available to the driller, so that he can work under the best conditions.

minage_controle

 

During drilling, the driller logs all anomalies of the ground tha are encountered. This drilling report is fully embedded into the 3D EXPERTIR Software, to gather all the information on the same support for the design of the fire plan.

 

minage_controle

To verify that the drilling matches the implantation, the exact hole position is taken with a precision GPS. Then each hole is checked, using an inclinometer sensor to monitor any possible deviations wich might occur during the drilling.

 

Once the geometric information and field data are collected in the same software, it is up to the miner to use his experience to establish the optimized fire plan.

 

minage_controle

Thus all the elements are available to establish a safe fire plan, guaranteeing optimum mass distribution, while respecting the environment by limiting the vibrations. A hole-by-hole loading plan for quality mining can be obtained in this way. All shooting plans are incorporated into a global topographic model for continuous tracking of the mining activity.

To learn more about the mining methods from EPC-France, please watch the video in the box on the top right.

 

 

Tags : Service - Solutions

Cet article vous a-t-il été utile ?
Pas utile du tout
Pas très utile
Plutôt utile
Très utile
Extrêmement utile
EPC Belgique

EPC Belgique

Siège social :

Rue Bois de Huy, 5D

4520 Amay

(Attention pas de livraison possible à cette adresse)

Tél :  085 27 47 90  

Fax : 085 27 47 99

TVA: 0422 454 596

 

Adresse de Livraison Site:

Chaussée de Waremme, 151

4520 Wanze

 

Adresse de Livraison Bureaux:

Au Tige de Villers, 3B

4520 Vinalmont